Products & Services
We offer four types of sleepers:
Cab-Hi
The Cab-Hi looks like a box and is the same height as your truck cab (22"-24” above the bed rails). up to 75” wide
starts at $3900
Over the Cab (DOT)*
The Over the Cab (DOT) has the most room (35”-37”" above the bed rails & 82” wide) and has a fairing over the roof for aerodynamics that can be used for inside storage. The size qualifies for a sleeper berth for CDL drivers. starts at $4400
*We sell the DOT sleepers in package deals to save you money.
Road Runner
The Road Runner (22”-24” above bed rail) is shaped like a wedge that permits smooth airflow over your truck and increased inside height for seating or sleeper. up to 75” wide. starts @ $3900
Coffin Sleeper
The Coffin Sleeper is rectangular and measures 82” wide, 33” deep, 36” tall. It is big enough to be a DOT sleeper berth. starts at $4400
Slide In Seating Units starts $1900
Use your current topper, or order one through us, and add more seats to your truck bed. Each unit is custom made for your truck. The slide in unit cost $1000 and you can add your own seats and seatbelts. Or we can order seats and attach them to the slide in unit. It can be attached to your topper or you can set it inside bed, bolt it down and take it out when not needed. Call or email any questions.
We are now offering METAL SLEEPERS & FIBERGLASS SLEEPERS. We have moved the shop to a better location & a better team. The metal shop is up & running and ready to build. The fiberglass shop will be up & running in 2 months or less. We offer all kinds of service now for hotshot drivers: build custom fuel tanks, remove truck beds and set up for hotshot drivers. Add gooseneck and 5th wheel hook ups. Build custom headache racks. Move exhaust and almost all metal truck repairs.
COMING THIS FALL: VAN TOPS
Installation
There is a team to install your sleeper or seating unit onto your truck for a fee of $500 to $1000 depending on your truck and the unit you have chosen. Installation can typically be completed in one day, however, sleepers that are mounted on flatbed or chassis could take two days to install. When you bring your truck to us, plan for a two day install. (see installation page with video)
Measurements for frame to bolt your sleeper to: measure from top of truck cab down 26”. That is the height of the 3” angle iron frame. Frame is to be same measurements as the sleeper being mounted (ex: DOT 33" x 82”). The frame must be 1” from the cab.
You can also choose to install your own unit. We can crate and ship the unit to your location along with installation instructions and supplies needed to self install. There is a shipping and handling fee as we make the crate to ship to you.
Electrical
If you chose to have TV mounted, electric lights, USB, or sockets wired into your unit, we will add support to the sleeper to hold those items and run the wiring ready to connect to your truck’s electrical system: just let us know when you place your order. Please note, it is the customer’s responsibility to connect it to your truck’s system due to complicated wiring and electrical systems in newer trucks. We can also cut holes for your AC/heat units if you choose that from our options list. You, the customer will need to purchase your small AC/heat for your units.
Additional Options for Cowtown Sleepers, Seating & Storage
CUSTOM PAINT
Currently all sleepers and seating units are finished with primer, ready to paint, OR white or black gelcoat. Custom paint is contracted out and is based on the cost of the paint itself; we can give you an estimate upon inquiry, but it is starts $1000.
DOORS
You can choose 24” X 24”, or walk-in doors that are 36" high x 26” wide.
WINDOWS
The units can be installed on the side or on the rear. All stock windows are tinted.
MATTRESS
Custom made to fit your sleeper and are 4”-5” thick.
LIGHTS
Dome lights can be battery or wired. Brake lights are required and are wired to your truck’s brake lights.
STORAGE UNITS
Can be made to fit inside your box bed, or larger one to fit on a flat bed or chassis.
SEATING
Jump seats and bench seats can be added to the storage area (seat belts required).
AC/HEAT
We have now located a (1) heat and (2) AC unit to supply comfort to your unit. We can install them but cannot supply the power to them. You’ll need a source of power such as a generator.
